KJM MANDÍK Installation, Commissioning, Maintenance
IZU 1.0 01/2021
MANDÍK, a.s., www.mandik.cz
R
13
-
exact exposure time - fundamental influence on the final effect of
disinfection
-
pH of water - many products have disinfectant effect only at a
certain pH
-
type and quantity of microorganisms that we want to eliminate
7)
Final rinsing with drinking water - removal of disinfectants and
thorough ventilation of the exposed area
8)
Drying - preferably spontaneous drying by evaporation to dryness
9)
Ensuring the right conditions for storage and disposal of waste
•
For effective disinfection (reduction of resistance of microorganisms), it is
recommended to alternate or combine disinfectants.
•
It is advisable not to buy chemical disinfectants in large quantities, to ask the seller
for comprehensive documentation meeting the requirements of local laws and
regulations.
•
Some disinfectants have a partial cleaning effect (surfactant character) and the
ability to penetrate the dirt, so they can be used as a combined cleaning and
disinfecting agent.
If AHU´s sections have to be cleaned, a method suitable for the respective case shall be
used:
1
Dry
Be caref ul not to damage painted surfaces and
sealed joints
2
Dry
Be caref ul not to damage painted surfaces and
sealed joints
3
Dry
Only f or installations that can be pulled out of the
unit
4
Wet
Be caref ul not to damage painted surfaces and
sealed joints
5
Wet
Be caref ul not to damage painted surfaces and
sealed joints
6
Wet
Only for installations that are equipped w ith a
condensate tray and drain
7
Wet
Be careful not to damage the materials/surface
of the cleaned components
8
Wet
Only for installations that are equipped w ith a
condensate tray and drain
Wet cloth/spraying and vacuuming
Wet brushing and vacuuming
Foam/Low pressure w ater
1)
CLEANING METHODS
Method
No.
Type
Disinf ection w ith a cloth/spraying
Disinfection w ith a foam/low pressure fluid 1) 2)
Activity
Warning !!!
Dry cloth and vacuuming
Manual brushing and vacuuming
Pressure air
