Page 6
M&G Technologies, LLC | Cleveland, OH 44202
Installation & Safety - cont.
rating of the extension cable and meet all national and local electrical code
requirements.
When attaching leads to battery terminals, be careful that tools do not short
between battery terminals. Shorting between battery terminals may cause extreme
arcing resulting in explosion or extreme heat that can cause burns.
Do not touch battery terminals or any exposed electrical parts during charging or
when power is on. Contact with battery terminals or other exposed electrical parts
may cause an electric shock.
Do not operate charger if wiring is damaged. An electric shock could cause
injury or death.
Ensure that the AC voltage supplied to the charger is within the ranges in the
specification table. Voltages outside this range, particularly high voltages, can
result in an electric shock and fire hazard and will fail the charger.
To reduce the rosk of an electric shock, connect only to a properly grounded
single-phase (3-wire) outlet.
Do not attempt to service the charger if you are not a trained service technician.
The high voltages inside the charger are a shock hazard and can cause serious
injury or death. The warranty is void if the charger case has been opened.
The charger contains chemicals cause birth defects or other reproductive harm.
Wash hands thoroughly after handling.
There could be a spark during charging. Be careful when using fuels, solvents
or other flammables near the charger or batteries. An explosion could result
causing death or serious injury.
•
•
Summary of Contents for 24V-25A
Page 1: ......
