M&C PSP4000-H, Instruction Manual

Page: 9 / 27

www.mc-techgroup.com PSP4000-H | 1.01.00 9
9.1 OPTIONS
Part No.
40S9130 Extra charge for PSP4000-H with ø 8 mm tube connector in the sample gas outlet
40S9100
Extra charge for PSP4000-H/FW with stainless steel filter wool receptacle including
glass wool filling, filter S-2K not included, connection M 12, material: SS 316Ti
Sample adapter with variable sample tube length:
40S9005
Adapter fitting 3/8“ with gasket and 8 mm PTFE sealing ring
40S9000
Adapter with cone transition for openings of ø 10 to 20 mm and ø 8 mm sample tube
out of SS 316TI, extensible from 80 to 200 mm.
[≈ 3.1“ to 7.9“]
40S9010
Sample tube ø 8 mm with position mark, for extensible probe length from 190 to 300
mm [≈ 7.5“ to 11.8“]
Fixed sample tubes for PSP4000 with male connector G 3/8", length 1 m
[≈ 3.3 ft]:
40S9020 Material: stainless steel SS 316Ti, ø 6 mm OD, max. 600 °C [1112 °F]
40S9030 Material: stainless steel SS 316Ti, ø 8 mm OD, max. 600 °C [1112 F]
40S9040 Material: stainless steel SS 316Ti, ø 10 mm OD, max. 600 °C [1112 F]
40S9050 Material: stainless steel SS 316Ti, ø 12 mm OD, max. 600 °C [1112 F]
40S9108 Material: Titanium, ø 6 mm OD, max. 400 °C [752 °F]
40S9109 Material: Hastelloy® C, ø 6/8 mm OD, max. 900 °C [1652 °F]
40S9112 Material: Inconel® 625, ø 12 mm OD, max. 1200 °C [2192 °F]
40S9106 Material: Kanthal®, ø 15 mm OD, max. 1300 °C [2372 °F]
40S9113 Material: Silicon nitride-ceramic, ø 12.5 mm OD, max. 1400 °C [2552 °F]
40S9110
Material: Ceramic, aluminium oxid1), ø DN 12/8, max. 1800 °C [3272 °F], for
mounting tube adapter PSP4000H/AO, Part No. 40S9111 is necessary
40S9111
Support tube adapter PSP4000H/AO, with 3 o-rings and 1 gasket, material: stainless
steel SS 316Ti
Heated sample tubes SP34-H (data sheet 2.19):
40S9115 Heated sample tube SP34-H with integrated thermostat
40S9120 Heated sample tube SP34-H1.1 with thermocouple sensor FeCuNi
40S9125 Heated sample tube SP34-H2 with PT100 sensor
Pre-filter SP1
04S5000 Pre-
filter SP1/SS3, OD: 30 mm, length: 150 mm [5.9“], filter porosity: 3 µm, material:
SS 316/316Ti, connection 1/4" NPT o
04S5010 Pre-
filter SP1/SS20, OD: 30 mm, length: 150 mm [5,9“], filter porosity: 20 µm,
material: SS 316/316Ti, connection 1/4" NPT o
40S9054 Screw-on connector with female thread for sample tube 12 mm for mounting SP1,
material: SS 316Ti, max. 600 °C [1112 °F]
Accessories made of SS 316Ti for stationary probe installation:
40S9060
Intermediate connection adapter G 3/4"o - G 3/8" i, ø 8 mm, for further adaption
possibilities, with gasket 3/4"
40S9070
Thread nipple R2" with G 3/4"
i und G 3/8" i for mounting the probe in R2“ thread
adapter, material: SS 316Ti
40S9080
Flange DN 65 PN 6 B with thread connection G 3/4" for mounting the probe to the
flange nozzle (other flange sizes on request)
90S2075
Flange gasket set for DN 65 PN 6 B, consisting of gasket (67) and screw set
M 12 x 60
Heated sample line PSP4M4/6 specially made for probe PSP4000-H:
01B4034
Connection fitting type I
for heated sample line PSP4M4/6 with 1.5 m [≈ 4.9 ft]
connection cable and 7-pole plug with integrated power supply for PSP 4000
01B4037
End fitting type K for heated sample line PSP4M4/6 with tube stub on the probe side
and 0.5 m [≈ 1.6 ft] connection cable axial to the rear, with 7 pole-plug