Mandam Hybro 3,0 Instruction Manual Download Page 9

 

CAUTION!  Failure  to  follow  the  guidelines  included  in  this  instruction 
manual will be regarded as misuse. The manufacturer shall not be liable for 
any damage arising out of misuse. 

 
 

 

3.

 

General safety information 

 

The Hybro weeder can be operated and repaired only by persons familiar with its 

operation  and  the  attached  tractor  as  well  as  the  rules  of  safe  operation  and 
maintenance of the machine. The manufacturer shall not be liable for any unauthorised 
alternation  of  the  weeder.  Only  genuine  parts  manufactured  by  MANDAM  are  allowed 
during the warranty period. 

The weeder must be operated with all precautionary measures, in particular: 

 

before  every  start-up,  check  Hybro  and  the  tractor,  make  sure  that  their 
conditions guarantee safety of traffic and operation, 

 

persons  under  age,  disabled  or  intoxicated  (under  the  influence  of  alcohol  or 
drugs) must not operate the machine, 

 

wear work clothes, shoes and gloves during maintenance, 

 

do not exceed permissible axle loads or transport dimensions, 

 

only genuine safety and split pins may be used, 

 

while  using  Hybro,  no  bystanders,  in  particular  children  can  be  present  in  the 
vicinity when the machine is being lowered, lifted, unfolded or dismounted, 

 

do not stay between the tractor and the weeder when the engine is running, 

 

move  forward,  lift  and  lower  the  weeder  slowly  and  smoothly  without  sudden 
jerks, making sure that nobody stays in the vicinity, 

 

obey traffic rules while travelling on public roads and attach transport equipment 
such as lights as well as reflective and warning devices, 

 

do  not  stand  on  the  machine  or  apply  additional  loads  during  operation  and 
transport, 

 

while making U-turns, pay due caution if anyone is in the vicinity, 

 

any repairs, lubrication or cleaning of working components may be performed as 
long as the engine is not running and the unit is lowered and unfolded, 

 

while  taking  a  break,  lower  the  machine  onto  the  ground  and  stop  the  tractor 
engine, store the machine properly so that no person or animal can be injured, 

 

no U-turns or reversing is allowed with the lowered machine. 

 

3.1.

 

Attaching the tractor 

 

Attaching the machine to the tractor must be carried out in accordance with the 
guidelines, bearing in mind the need to secure the suspension using bolts. 

 

While  attaching  the  tractor  to  Hybro,  it  is  forbidden  for  any  person  to  stay 
between the machine and the tractor. 

 

The  tractor  used  together  with  the  weeder  must  be  fully  functional.  It  is 
forbidden  to  attach  the  machine  to  any  tractor  with a  malfunctioning  hydraulic 
system. 

 

Summary of Contents for Hybro 3,0






















Reviews: