RADIOEM903
RADIOEM903
- Dip Switch Transmitter
- Dip Switch Transmitter
Replacement and Programming Instructions
Replacement and Programming Instructions
Transmitters: Compatibility and Replacement
Replacement Product
Discontinued Products
Tr
a
ns
m
it
te
r
RADIOEM903
•
3-Button Transmitter.
•
Operates up to 3 doors.
•
Open / Close function.
•
LED indicator.
•
3V battery.
•
Sun-visor clip.
RADIO022
(MT3-1000)
•
3-Button Transmitter.
•
Operates 3 doors.
•
Open / Close function.
•
9V battery.
•
Sun-visor clip.
RADIO016
(MT2-1000)
•
2-Button Transmitter.
•
Operates 2 doors.
•
Open / Close function.
•
9V battery.
•
Sun-visor clip.
RADIO027
(MT-1000)
•
1-Button Transmitter.
•
Operates 1 door.
•
Open / Close function.
•
9V battery.
•
Sun-visor clip.
Programming Instructions
➢
RADIOEM903 Transmitter Initial Configuration: Use it to Control 1, 2 or 3 Doors.
1. Press and HOLD
Buttons
j
and
l
simultaneously for
5 sec
.
The
RED LED
will
BLINK
. You have 15 sec. to complete the
configuration or you will need to restart.
2. Release
Buttons
j
and
l
.
3. Press
Button
j
or
k
or
l
in order to configure the transmitter
to the appropriate number of doors to be controlled by this
transmitter, ie:
j
for 1-Door,
k
for 2-Doors,
l
for 3-Doors.
4. The
RED LED
will stop blinking. Programming is now complete.
5. The remaining buttons will be deactivated.
➢
Replacing RADIO022 (3-Door Transmitter) with new RADIOEM903 (3-Door Transmitter):
The DIP SWITCH transmitter has 10 switching keys. With the use of a screwdriver or a pen, place the dip switch keys
on RADIOEM903 at the same positions as those found on RADIO022.
Coding the Receiver (as reference):
➔
Dip Switch Keys
#1 to #7
= must be at the same ON / OFF positions as the transmitter.
➔
Dip Switch Keys
#8, #9, #10
= coding of the receiver number
jkl
(refer below for the receiver number).
Door
j
= Receiver
j
g
Button
j
Keys
#8
and
#10
must be set to
ON
. Key
#9
must be set to
OFF
.
ON
↑
1
2
3
4
5
6
7
8
9
10
Must match with transmitter
■
■
■
1-800-361-2260
1
TN1040 REV 1 - 2017/07/13
j
l
k
j