background image

11

0

0

10

10

30

30

50

50

70

70

90

90

110

110

130

130

0

0

10

10

30

30

50

50

90

90

70

70

110

110

2

3

4

1

13

Right Leg Pictured

Right Leg    Left Leg

CALF CUFF APPLICATION

Wrap the cuff around the calf and secure the Velcro to hold it in place.
Make sure the wrap is snug, but not too tight.

Check the parts. (A) Pump with tube,  (B)  Compressor 
device, (C) EZ ROM Ice Pack.  Refrigerate the (C) EZ 
ROM Ice Pack for at least two hours prior to usage.

Place EZ ROM Ice Pack on the inside of Compressor 
device after refrigeration.  Connect the tube to the 
ON/OFF switch and turn “ON” the switch.

Position the Compressor device so the hole appears 
at the knee joint. Wrap the velcro straps to secure 
in place.  For best results; ON for 5-10 minutes, OFF 
for 5-10 minutes.

To adjust flexion and extension control, remove the 
pins to the desired settings of your prescribing 
physician. 

CORRECT PLACEMENT

When both wraps are secured on your legs, 
they should look like the picture above.

TURNING THE DEVICE ON

When the wraps are secured on your legs PRESS the power button 
for three seconds until the blue light is illuminated on each unit.

14

PATIENT DEVICE USE

Unit will inflate and deflate to the specified 
mode as directed by your physician.

15

SWITCH MODES

For instructions on how to switch between modes, 
please refer to “Instructions” section on this page.

HO

LD

     H

OL

D F

OR 

3 SE

CON

DS

2

QUICK START

QUICK START

2

QUICK START

5240 W Charleston Blvd.

Las Vegas  NV 89146

(B)

(C)

(A)

5

10

5

10

ON

~

 OFF

~

Order information

Part Number: TJK

001

Contents:

PlamsaFlow, ManaFlexx2, EZ ROM

How to order

Email: [email protected]

Fax: 

888-508-0712

Call: 

888-508-0712

1

Snap Controller onto Pad

2

Apply ManaFlexx2 to body
as recommended by physician

3

Turn on/off controller by pressing
the  “Power” icon on controller

4

Increase intensity by pressing
the “ + ” button.  Intensity level 
indicated by the number displayed.

5

Decrease intensity by pressing
the “ - ” button.  Intensity level 
indicated by the number displayed.

6

7

Leave the patch in place for up to 
12 hours while the device is turned 
off automatically or manually.

For quad atrophy, it may be recommended
to place the electrode like the image above. 
Consult your healthcare professional
for more information. 

Reviews: