Faults
81
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
9
Faults
The following chapter describes the possible faults which can occur and the work to correct them.
For those faults that cannot be rectified by the following information, contact the manufacturer of the entire
system or MAN Service.
9.1
Requirements
Before starting any work read and observe the General Safety Instructions and the safety information in
this chapter.
Strictly observe these instructions and act prudently to avoid accidents, personal injury and property
damage.
9.2
Safety instructions
Personnel
Engine faults may only be rectified by specially trained qualified personnel or by the manufacturer of the
entire system.
Personal Protective Equipment
The following protective equipment must be worn:
S
Protective Clothing
S
Safety Shoes
S
Safety Gloves
Ground Rules
WARNING
Risk of injury and damage due to untrained personnel
For this reason:
S
Only trained personnel are allowed to remedy faults.
S
Ensure that the engine cannot be started by unauthorised persons.
S
Ensure adequate work space before starting any work.
S
Make sure the work space is kept clean and orderly.
