Man D 0836 LE 401, Operating Instructions Manual

Page: 27 / 76

Commissioning and operation
27
Setting the illumination (external illumination)
Select here whether illumination of the tachometer and the connected bus instruments
are to be connected internally or externally.
EXTERNAL: The illumination is switched on and off through an input
of the 14-pole plug. Dimming of the illumination is thus
not possible.
INTERNAL: The illumination is regulated in the normal operating
mode by pressing and holding the push-button key in 8
steps.
Selection of the displays (screen on / off)
Select here wich measured values are to be displayed in the normal operating mode.
YES: Here all measured values, with their ISO symbol, are
displayed. By selecting “NO” the measured value can be
removed from the normal operating mode. If the
measured value is to be displayed again, select “YES”
when the ISO symbol of the measured value is
displayed.
NO: No change in the setting are made.
Aktivation of the simulation mode (simulator mode)
Select here whether the simulation mode is to be switched on.
YES: The simulation mode is switched on. The display now
generates random values for all measuring channels
and displays these. The measured values are also
transmitted to the bus instruments.
NO: The simulation mode is switched off.
Please note that the simulation mode still remains after switching off and switching on
again, if it has not been switched off by selecting NO.
Setting of the nomber of exhaust gas temperature measured values (charge boost
amount)
Select here whether one or two measured values are to be displayed for the exhaust gas
temperatur before the turbine.
1: One exhaust gas temperatur measured value.
2: Two exhaust gas temperatur measured values.
(V-type engines)
Ending the settings (exit setup)
Select here whether the settings are to be exited.
YES The settings are exited, the display restarts in the normal operating mode.
NO The settings are restarted.