Installing USB devices
I
nstalling the EasyConnect GPS Module
Align the two pins on the module with the
pin holes on the tablet.
2a
1
Insert the connector end of the USB device into the
USB port on the module.
Removing the EasyConnect GPS Module
Installing USB devices
Installing Ethernet Cable
Gently push the module onto the tablet until
the module snaps into the docked position.
2b
Module in the docked position.
Place your finger behind the top edge of the module
and pull the module away from the tablet.
Page 3
Install the GPS driver
Go to www.man-machine.com/GPS.htm and
download and install the GPS Driver.
Identify the COM port used by the GPS
To indentify the COM Port, go to the Device
Manager, expand Ports (COM & LPT), and find the
COM Port number assigned to Prolific USB-to-Serial
GPS Port.
(To find Device Manager, go to Start, right click on
My Computer, click Properties, select the Hardware
tab and click Device Manager.)
Launch the GPS Software
Run the GPS software application. Change the
COM port to the assigned port number and use
Baudrate 38400.
Insert the Ethernet cable connector into
the Ehternet port on the module.
Using the GPS