Mammuth LT3HHM, Manual

Page: 14 / 21

ENG
14
3. Control
Control before use
WATCH OUT! It is important that the lifting table is checked for defects prior
to each use, if there is a
defect, the lifting table should be decommissioned immediately until this
defect has been rectified.
Failure to follow this instruction may result in serious bodily injury and/or da-
mage to materials/property.
Before each use, check the lifting table at the following points:
1. Check the lifting table for leaks, cracks, damage, signs of wear and deforma-
tions.
2. Make sure the cylinder doesn’t leak oil.
3. Make sure that the table goes straight up and that it is not skewed.
4. Make sure the wheels are all running smoothly.
5. Make sure the brakes are working.
6. Make sure that all joints, bolts and nuts are still securely attached.
Use
WATCH OUT! This lifting table should only be used on a hard, flat and stable
surface.
When the table is stationary/not ridden, it is recommended to put it on the
brake, to prevent accidental movement. The rear swivel wheels are equipped
with a brake, which works as follows:
When the cliff is pressed down, the brake is operated.