background image

15

TROUBLESHOOTING

Issue

Possible Solutions

The Fridge/Freezer will not turn on

Check the unit is switched ON – Press and hold button for 2 to 3 seconds

Check the power source (voltage may be too low)

Check the power cable and all connections from the battery to fridge/freezer

Check the fuse at the Power Input Panel

The contents of the fridge are freezing

The temperature has been set too low, therefore increase the temperature setting.

Poor refrigeration performance

Too much food has been put inside the unit

Temperature of the food put inside the fridge is too high

Lid is not closed properly

Lid seal is damaged

There is poor ventilation around the fridge

Ambient temperature is very high

Temperature is not set correctly

There is a “water flow” type of noise from 

inside the unit

This is normal, caused by the flow of refrigerant

There is a noise from the unit

Unit is not on a flat level surface

Check for vibrations in surrounding objects

Fridge/Freezer does not work and display 

does not illuminate

There is no voltage present in the 12V/24V cigarette lighter socket in your 

vehicle. The ignition must be switched ON in most vehicles to apply current to the 

cigarette lighter socket.

No voltage present in the AC voltage socket. Try using another plug socket.

 The fridge/freezer fuse is defective. Replace the fuse.

The integrated mains adaptor is defective. This can only be repaired be an 

authorised repair centre. Contact After Sales Support 1300 555 197.

Fridge/Freezer does not work and display  

does not illuminate when operating from 

the 12V/24V cigarette lighter socket with 

ignition switched ON.

The cigarette lighter socket fuse is defective and must be replaced.

The cigarette lighter socket must be cleaned or the plug has not been assembled 

correctly.

Summary of Contents for COMP02056





















Reviews: