EN
14
LAYOUT
1.On/Off switch
2. Locking button
3. Locking for speed
4. Saw blade
5. Soleplate
6. Blade holder
7.allen key
8.hexagon socket screw
BEFORE STARTING THE EQUIPMENT
Before you connect the equipment to the mains supply make sure that the data on
the rating plate are identical to the mains data.
Always pull the power plug before making adjustments to the equipment.
1. Changing the saw blade (B2)
Always switch off and unplug the reciprocating saw before working on the machine
or changing the saw blade.
Turn the ring on the blade holder (6) as shown in Fig. 2 until the blade lets itself
be slipped into the slot of the blade holder (6).
When you now let go of the ring again, the ring should return to its starting
position.
If this fails to happen, try turning the ring by hand into its starting position.
Pull on the blade to check whether it sits tightly in the holder.
2. Adjusting the soleplate (B2)
Loosen the hexagon socket screw (8) by allen key (7), pull or push the soleplate
to a desired position.
fasten.
Check that the soleplate is secure.
3. Electronic speed control (B3)
By increasing pressing the on / off switch (1), the speed increases.
With the speed selection (3) in the ON / OFF switch (1), the desired speed can be
selected.
Turn : higher speed
Turn towards -: lower speed
OPERATION
1. ON/OFF switch (B3)
To switch on: Press the ON/OFF switch (1)
To switch off: Release the ON/OFF switch (1)
2. Locking button (B3)
You can lock the ON/OFF switch (1) using the locking button (2) when the
equipment is in operation. To lock it, press the ON/OFF switch. To switch off the
equipment briefly hold down the ON/OFF switch.
End of life machines contain valuable materials and therefore they
should not be placed in household waste. We would ask you to play
your part in protecting resources and help protect the environment
by returning this machine to a return point (if one is available) when
it reaches the end of its life
Double insulated
