Lens Mounting/Removal
Match the red dots on the lens and Press the lens release button and turn camera body, seat the lens in the mount
lens counterclockwise until it stops. and turn clockwise until lens locks in Unseat lens from mount. place with a
click.
Note on White Button:
The white button serves as an auto aperture lock for shutter speed priority AE and
programmed AE operation with both E and EF lenses. To lock the ring at the index mark, press the button and
simultaneously rotate until it locks in place. To unlock the ring press button and rotate to desired aperture
setting.
Caution:
When not mounted, always cover both ends of lenses with lens caps to protect from dust and
scratches. Do not put lens down on its uncovered mount. Wipe electrical contacts gently with clean cloth
periodically to maintain proper contact.
Loading the Film
1. Open the back cover of the camera by pulling up on the rewind knob. (Avoid direct sunlight when
loading or unloading film.) Load the film cartridge into the film chamber of the camera and reset the
rewind knob to its original position.
2. Insert the end of the film into the slot of the film take-up spool.
3. First advance the film by operating the film advance lever; then rotate the film rewind knob in the
direction of the arrow to take up film slack. Make sure that both the upper and lower teeth of the
sprocket are engaged in the perforations of the film.
Summary of Contents for ZE-X
Page 6: ...Description of Parts ...
