background image

This setup guide illustrates how to use this product with the most basic settings.

This explanation will illustrate how to upload onto the computer and develop the photographed images.

Refer to the “Mamiya Digital PhotoStudio User’s Manual” for details.

Software section

Installing the software

1

If there are any software applications running in the background (including virus check software), please shut them down.

NOTE

Using Windows

Operating environment of the computer having this program installed.

The following operating environment is recommended for the computer having this

software installed.

OS

Windows 2000/Windows XP

CPU

Pentium 4 or higher, 2.4 GHz or faster

Memory

1 GB or more

Display

1024 x 768 pixels or more, capable of 24-bit full color

Hard Disk

256 MB or more available disk space

Using Macintosh

Operating environment of the computer having this program installed.

The following operating environment is recommended for the computer having this

software installed.

OS

Mac OS X v10.2 and after

CPU

Power PC G4 350 MHz or faster

Memory

1 GB or more

Display

Displaying over 16,700,000 colors / 1024x768 and above

Hard Disk

256 MB or more available disk space

1. Start the computer and insert the included

CD-ROM into the CD-ROM drive of the

computer.  Double click the [MAMIYA_DP]

icon and then open  [SETUP.EXE].

A screen for selecting the language type of the

installed software will be displayed.

2. Select [English] and click on the [OK] button

in order to start the installation.

Continue the install process according to the

messages being displayed on the screen.

NOTE

Select [AGREE] when the screen confirming on Terms
of Use [LICENSE AGREEMENT] is displayed. Continue
the install process.

3. Press the [Finish] button when the [Setup

Completed] screen is displayed.

The installed software will be ready for use

once the computer is restarted.

1. Start the computer and insert the included CD-ROM into the CD-ROM drive of

the computer.

2. Double click the [Mamiya Digital

PhotoStudio] icon.

3. The [Install Mamiya Digital PhotoStudio] screen will be displayed. Click the

[Continue] button.

Continue the install process according to the messages being displayed on the

screen.

4. Press the [Close] button when the

“The software was successfully

installed” screen is displayed.

The installed software will be ready for

use once the computer is restarted.

Select [Agree] when the screen confirming Terms of Use is displayed.
Continue the install process.

NOTE

Displaying images

2

The Windows XP screen will be referred to for this explanation.

NOTE

1. Start the computer.  Using the card reader, upload the images stored on the

memory card onto the computer.

2. Double click the [Mamiya Digital Photostudio] icon on the desktop and open

the software program. (Double click the [Mamiya Digital PhotoStudio] icon

placed in the designated folder during installation when using the Macintosh

operating system.)

[Mamiya Digital PhotoStudio] (the

start-up screen) window appears.

(Only the toolbar will be displayed on

the Macintosh operating system.)

3. From the [File] menu, select [Open].

The [Open] window appears.

4. Open the folder where the RAW data photograph is stored and select the

image file (RAW data: extension MEF).  Click the [Open] button.

The image will be displayed.

3

Adjusting and developing the image

The development process using the “Processing Wizard (Processing Preview Assistant
for the Macintosh version)” will be explained below. Refer to the Mamiya Digital PhotoStudio
User’s Manual for details.

1. From the [Tool] menu, select [Processing Wizard (Developing Parameter Setting

Assistant on the Macintosh version)].

The [White Balance] screen of the [Processing Wizard] screen.

Double click

[Shot Setting], [WB mode], [Color
Temperature], [Mired], and [File]

can be set accordingly on the [White Balance]
screen.

NOTE

2. Click [Next] after setting the [White Balance] settings and set the [Exposure

Compensation].

The upper level will display the pre-adjustment and post-adjustment
images in the [Processing Wizard].

The lower level will display the image variation according to the adjusted rates.
The adjustment rate can be set by selecting on the desired image in the lower level.
Clicking on the left and right images on the lower level will display the image in the
center, and will be referred to as a post-adjusted image.

NOTE

Exposure correction can be set
using the adjustment width setting

using the adjustment width slider on the
[Exposure Compensation] screen. Clicking on
the right hand image will adjust in the +
direction and clicking on the left hand image
will adjust in the - direction.

NOTE

3. Click [Next] after setting the [Exposure Compensation] settings and set the

[Tone].

4. Click [Next] after setting the [Tone] settings and set the [Saturation].

5. Click [Next] after setting the [Color] settings and set the [Color Balance].

6. Click [Next] after setting the [Color Balance] settings and set the [Sharpness/

Noise Reduction/Lens Correction].

Adjustable Range slider

Adjustable Range slider

7. Press the [Save] button after the [Sharpness/Noise Reduction/Lens Corretion]

settings are complete.

This will end the setting process using the [Processing Wizard].

8. Select [Processing Options] from the [Settings] menu.

The [Processing Options] window appears.

9. Set [Output format], [Color Space], and [Save Destination] on the [Processing

Options] window.

10. Click [Process] 

 icon on the Tool Pallet.

Each of the Red, Green, and Blue
Color balances can be using the

adjustment width set on the adjustment width
slider on the [Color Balance] screen. Clicking
on the right hand image will adjust in the +
direction and clicking on the left hand image
will adjust in the - direction.

NOTE

On the [Saturation] screen, clicking
on the right hand image will adjust

in the [High] direction and clicking on the left
hand image will adjust in the [Low] direction.

NOTE

On the [Tone] screen, clicking on
the right hand image will adjust in

the [Medium High] direction and clicking on the
left hand image will adjust in the [Medium Low]
direction.
Placing a check mark on [File] will use a
previously saved adjustment file for
adjustment.

NOTE

By using [Output format], you can select the file format to be output from
the three types of [Exif-JPEG], [Exif-TIFF(8bit)], or [TIFF(16bit)].

By using [Color Space], you can select the applicable color space from the two types
of [sRBG] or [AdobeRBG].

By using [Save Destination], you can set the save location of developed pictures.

NOTE

Software Functions

This software has the following five functions. Refer to the User’s
Manual for details.

(1)

Browsing

This is a function that allows the user to display raw images
taken and developed image data on a computer. Thumbnail
display and Preview display are possible.

Thumbnail

This is a function that allows the users to list taken images and
developed image data at a reduced size.

Preview

This is a function that displays a preview of the output image
of taken images and developed image data.

Displaying Image Information

This is a function that allows the user to view the file name, file
size, and various other settings of the image taken.

(2)

Retouching (editing) function

Overall adjustments and individual adjustments can be carried
out through the Wizard Format (consists of answering the
questions posed by the system allowing easy overall
adjustment).

(3)

Developing

This is a function that allows the user to modify image white
balance, color balance and exposure correction to develop the
image.

(4)

Output

This is a function that allows the user to output developed
images from a printer or image setter.

(5)

Capture Function

This is a function that allows the user to take images by
controlling the aperture and shutter speed of a camera from a
computer when the camera is connected to a computer which
has the software installed.

Strength of sharpness can be
adjusted with the slider of

[Sharpness] appearing on the [Sharpness/Noise
Reduction/Lens Corretion] screen.
Strength or width of eliminating noise can be
adjusted with the slider of [Noise Reduction].
In the [Lens Corretion] screen, you can select
[Vignetting Reduction] and [Distortion
Correction].
If you put a checkmark next to [File] for each
parameter, various corrections can be made by
using the set adjustment files.

NOTE

DCSG0606EN02 Printed in Japan

Reviews: