and in one-stop intervals in Manual Mode.
Shutter Speed Range
AE Mode: 4 sec. to 1/400 sec. in 1/6 EV steps, ½
stop intervals. Manual Mode: 8 sec. to 1/400 sec. in
½ stop intervals.
Viewfinder Readout
Metering Modes are indicated by ‘A’ (Averaged) or
‘S’ (Spot). Shutter speeds of 1 sec. to 1/400 sec.
and ‘LT’ (>1 sec. to 4 sec.) are displayed. Flashing
LEDs indicate overexposure (∆), underexposure
(LT) and a weak battery. In Metered Manual Mode,
the preselected shutter speed is illuminated and the
appropriate shutter speed flashing.
Metering Range
EV 1 to 18.5 (f/2.8 at 4 sec. to f/32 at 1/400 sec. -
ISO 100 and 110mm f/2.8 lens
Exposure Compensation
±3 EV in 1/3 click-stop intervals.
AE Lock
The exposure will be memorized when the finder’s
Shutter Speed Dial is set to ‘AEL’ and the camera’s
Shutter Speed Dial is depressed halfway.
Power Supply
Camera battery.
Attaching the Finder to the Camera Body
1.
Remove the Waist Level Finder from the camera body.
2.
Remove the plastic Electrical Contacts Cover (if installed), Fig. 1, by pulling it up and off the
camera’s Electrical Contacts (10).
3.
Insert the finder’s two Attaching Pins into the camera’s finder mounting holes.
4.
While pushing the finder’s two Attaching Latches (8) down and toward the back of the finder,
lower the finder onto the camera body, gently push it down until it seats with the camera body,
and then release the two Attaching Latches (8), Fig. 2.
5.
Gently lift up on the finder to verify that it is securely latched to the camera body.
