Removing the Front Body Cap and
Rear Cover
Attaching the Lens Removing the Lens.
First remove the Front Body Cap in
the direction of the arrow, while
pushing the Lens Release Button
backwards as indicated by arrow.
Rear Body Protective Cover can be
readily removed by depressing the
part
of
as shown in the illustration.
Line up red Lens Alignment Dot
against red camera Alignment Dot
(C)
and gently insert the lens into the
camera body. Then turn the lens
clock wise, as indicated by arrow,
until it clicks into place. Make sure
that the Aperture Ring Coupler Pin
is engaged with the Exposure Meter
Coupling Pin
which sticks out
under the Mamiya name plate of the
camera.
While pushing lens release button back-
wards, turn lens counterclockwise.
(Same procedure as removing body
cap).
When
the Aperture Ring Coupler Pin
is engaged
by the exposure meter coupling pin lever, F/stop
data is conveyed to the AE Prism Finder.
10
Summary of Contents for PRO 645
Page 1: ...Instructions...
Page 42: ......
