background image

Mamiya C330S: Page 2

Specifications

2

 

Type

6 x 6 Twin-Lens Reflex Camera with Interchangeable Lens System

Picture Size

56 x 56 mm (actual picture area)

Film Size

120 roll film (12 exposures), 220 roll film (24 exposures)
Changeover effected by turning pressure plate 

Lens (standard)

Mamiya/Sekor 80 mm f/2.8

Shutter

Seiko-#0 (B, 1-1/500 sec., M-X synchronization)

Focusing

Front extension system by rack-and-pinion with focusing knobs.

Focusing screen

Changeable

Focusing hood

One-touch operation facilitates interchange of dioptric lenses.
Removable and replaceable by other types of finders. 

Film wind

By winding crank. Automatic shutter cocking and winding stop. Double 
exposure prevention device.

Exposure counter Progressive type, automatic re-set. (120/220 changeover coupled with the 

pressure plate)

Other features

Parallax and exposure compensation are readable on the focusing screen in the 
finder.
Multiple exposure possible. Shutter release lock provided. 

Dimensions

123 (W) x 171 (H) x 113 (D) mm

Weight

1,650 grams (with 80 mm f/2.8 lens)

·Due to a modification of the product, specifications and appearance are subject to change without 

notice.

<- Prev

 | 

Table of Contents

 | 

Next ->

 

file:///E|/c330s/page_02.html [22-10-2003 15:26:31]

Summary of Contents for C330


















































Reviews: