9
6.
If two shutter speeds are illuminated, the camera will make an exposure at an intermediate speed. For
example, if both 1/60 sec. and 1/125 sec. are illuminated, the shutter will fire at speed between 1/60 and
1/125.
AE Lock (AEL) Photography
AEL photography is used to make selective exposure measurements on
areas of your subject that are not in the center of the frame.
1.
Set the Shutter Speed Dial to its ‘AEL’ position.
2.
Look through the Viewfinder and position the most important part of your subject in the Viewfinder’s
center circle.
3.
Depress the Shutter Release Button halfway and keep the button in this position. The exposure
information will be memorized as long as the button is held in position.
4.
Recompose and focus your subject, and then fully depress the Shutter Release Button to activate the
shutter.
Manual Exposure Photography
1.
Set the Shutter Speed Dial to any position except ‘A’ or ‘AEL’.
2.
Set the lens to the desired aperture.
3.
Press the Shutter Release Button down halfway.
4.
The correct shutter speed will blink in the Viewfinder.
5.
If two shutter speeds are displayed, an intermediate speed will be used for the exposure. The shutter
speed set on the camera is illuminated, the correct shutter speed blinks.
Summary of Contents for 645E
