mamibot V6, User Manual, Page: 20 / 23

Note: If the stainless filter or hepa filter are rinsed in water, please don’t use until thoroughly dry.
3.8 Disassemble aluminum tube
Press the Release Buttons of aluminum tube to take off tube from the brush set and cleaner head.
3.9 Disassemble and clean the motorized brush set
1) Turn off the cleaner and put motorized brush set up-side-down, use a coin to rotate the
Release Button of B-Beater Brush set in anti-clock wise direction, take off the brush bar.
2) Clean dust, hair, fabric particles on the brush bar with your cleaning tool, cut hair with knife or
scissor if the brush bar is tangled.
3) Please make sure the brush bar is dried thoroughly before second use.
Note: Please switch off your V6, take off the brush set from tube before cleaning, children are
prohibited from cleaning it in case of personal injury.
3.10 Cradle installation
It is suggested that the vacuum cleaner’s brush set can touch floor surface in a proper position.
Therefore, the cradle’s position is recommended with the same height as the cleaners straight
height from floor surface. Fix the cradle on the wall with provided screws and expansion pipes