Care and Maintenance
Self-Cleaning
Flomo can clean the roller brush and pipeline automatically on Self-Cleaning Base:
1). Please make sure there is enough clean water in the clean water tank , empty dirty
water tank before self-cleaning.
2). Place Flomo on the charging station(1), plug in the power supply well.
3). Press the Self-Cleaning button(2), the indicator will flash white slowly, and Flomo will
spray the clean water, clean the roller brush and pipeline automatically, meanwhile, it will
vacuum the dirty water into the dirty water tank.
4). Please unplug the power supply and clean the dirty water tank once the self-cleaning
mode finished to avoid it get stinky.
(1)
(2)
Please unplug the power supply, turn off the switch and remove the battery pack out
before care and maintenance.
1. For daily care and maintenance, use a soft dry mop to wipe the main body, the
charging station; use a soft moist mop to wipe the brush base, scraper, infrared sensor.
2. Roller Brush Cleaning
Release the lock button of the roller brush, rotate the brush counterclockwise, then pull
the brush out, clean the brush and brush guard with cleaning tool.
12
Attention: Please make sure the Dirty Water Tank, the HEPA and filter are properly installed
when do self-cleaning.
