220616
(802) 347-2111
•
180 Battery St, Suite 210, Burlington, VT 05401
| Solo
19
4.
Remove the light fi xture (16765)
from Box 1: Assembly Guide +
Hardware.
Place into position at the top of the
back wall with the plug towards the
left wall. The three holes in the light
fi xture should line up with the three
holes in the back wall.
5.
While one person holds the light
fi xture, use a 5 mm hex key to
fasten it to the back wall using (3)
M8 x 35 button head cap screws
(16840). It’s helpful to use a small
step stool inside the pod or a
ladder outside the pod.
6.
Connect the two wires in the left
corner of the light fi xture.
X3
