Malvern Visco 88, User Manual, Page: 44 / 74

Chapter 5 Using the Bohlin software
Page 5-4 MAN 0378
Note
The buttons in this dialogue replace the controls on the instrument itself
(except for the
ON/OFF button) but there is no direct correlation
between buttons in the software and those on the viscometer front panel.
The software operates in a far more complex way and the user must read
its online help before starting to use it.
6.
If the computer and instrument are communicating correctly, the display on
the instrument shows
OK as shown below:
ill 7724
7.
If this is not displayed, use Options-Instrument Serial Port to open this dia-
logue for checking the COM port setting on the computer:
Select the correct port in the list and select the Restart Communications
check box. Click the OK button. The text OK should now appear in the vis-
cometer’s display.
8.
The instrument is now ready to use.
i
OFF
1
OK