Usages
The polishers produced by our company are stable functioning, high speed, fast polishing,
equipped with head lock combination of fast converting polisher and mult-function power
box. It’s designed for the polishing of nails, teeth, moulds, jades, Jewelry and other precise
polishing. Different heads are designed to get different polishing effects.
Characteristics
1. Portable polisher
Equipped with fast head-loading mechanism, good locking effect, high speed, low
variations, and safety with low voltage machine.
2. Power box
Stable power delivery, overload protection, effective converter, foot push, non-polarized
speed adjustment.
Operation instructions
1. Before connected to the power, please make sure the input voltage is the same with
the voltage required on the backside of the power box.
2. Socket should be well earth connected.
3. Connect portable polisher to output socket of power box, then connect foot push to
the socket of fool push on the backside of power box.
4. Choose different heads according to different requirements.
5. Adjust the speed to the minimum.
6. Switch on. With the indicating lamp on and the polisher head turns slowly.
7. Adjust the speed controller to increase the speed.
8. Switch to FOOT if you choose to use foot push, the speed will be increased as you
increase foot pushing force.
9. The opposite-direction of rotating heads could be chosen, but only at non-wording
state. The polisher can be restarted if it stops due to overload.
10.The speed must be adjusted to the minimum when start or stop the polisher.
11.
If the indicating lam isn’t on during working. Please check the fuse and change it if it
broken.
12.Make sure the power is off if polisher not used for a long period.
13.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety, children should be supervised to
ensure that they do not play with the appliance.
14.Don’t open the machine. Please contact the distributor or authorized repair center if
you have any problems.
15.If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Warning:
Please keep equipment dry.
5/9
