6. Machine assembly
Fig. 2 & 3
1. Slide the cable securing hook (1) onto the underside of the handle (2) (Fig. 2).
2. Slide the bottom of the handle (2) into the turning unit (3). then screw the quick
coupler lever (4) to the body of the scarifier (fig. 3).
3. Insert the two retaining bolts (8) inward through the hole in the bottom handle (2)
and attach them to the middle handle (6) with two wing nuts (5) (Fig. 4).
4. Insert the two retaining bolts (8) inward through the hole in the upper handle (7) and
attach them to the middle handle (6) with two wing nuts (5) (Fig. 4).
Fig. 4
5. Insert the metal frame (10) into the textile basket (9) and attach all the latches to the
left, right and rear frame rods. Make sure all latches are properly fastened (fig. 5).
19/36
