NOTICE: Do not attempt to cut branches thicker than 15 mm in diameter with the
tool.
NOTICE: Do not cut down dead trees or similar hard objects.
Doing so may damage
the tool.
NOTICE: Do not trim the grass or weeds while using the shear blades.
The shear
blades may become tangled in the grass or weeds.
Hold the tool with both hands, press the switch lever and pull the switch trigger while
pressing the lock-off lever, and then move it forward.
For basic operation, tilt the shear blades toward the trimming direction and move it calmly
and slowly at the speed rate of 3 to 4 seconds per meter.
To cut a hedge top evenly, tie a string at the desired height and trim along it.
30/ 52