Malsch IMPULSE KL, Instruction Manual

Page: 37 / 64

| 37
ESG side rail adjustment
One-part side rail
(IMPULSE KL hospital bed with undercarriage Edition 200)
The side rails are in the standby position (Fig. 1) and allow the
patient to get into and out of bed easily.
1. In order to raise the side rail, grab it by the upper bar and
swivel it upwards along the sleeping surface until it audibly
clicks into place (Fig. 1 / 2).
2. To lower the side rail, proceed in reverse. Pulling the
locking button at the foot end of the side rail (Fig. 3)
releases the locking mechanism. At the same time, initiate
the downward swivelling motion and carefully lower the
side rail (Fig. 4).
Caution! When raising the side rails and side rail
height extensions, ensure and check that the latch-
es engage securely. Always use both hands to move
this element!
Caution! When lowering and raising the side rails,
please be extremely careful not to trap fingers,
hands or any other parts of the body between the
side rails and the sleeping surface frame.
Fig. 3
Fig. 4
Fig. 1
Fig. 2