Malsch Impulse 300 KL, Instructions For Use Manual

Page: 27 / 36

| 27
Hand controller holder
The additional hand controller
holder allows you to place the
hand control within reach of the
patient.
Caution ! The hand controller holder is flexible
and must not be used as an aid to standing up
or a handle.
Horizontal hand controller
The additionally available hori-
zontal hand controller can also be
connected to the controls and al-
lows the lying patient easy access
to the functions.
Caution ! The hand controller holder must not
be used as an aid to standing up or a handle.
Caution ! The additional hand controller must
only be connected by authorised specialist staff.
Mattresses
Betten Malsch GmbH offer a range of individually made spe-
cial mattresses for the widest range of applications and de-
mands on lying surface contours of clinical beds. Please ask
your specialist retailer of the manufacturer for the right mat-
tress for your requirements.
Caution ! Only use mattresses tested and au-
thorised by Betten Malsch GmbH.
For safety reasons a minimum protective height
of 220 mm should be maintained between the
upper edge of the mattress and the upper edge
of the side rail. This protective height is directly
related to the height of the mattress!
Side rail heightening
To protect from decubitus (pressure sores) and to accommo-
date patients with hip or spine injuries, you can use various
alternating pressure systems and underlays, which mean
the mattress is built up by more than 16 cm. For this, Betten
Malsch GmbH offer an extended height side rail elevation in
its range of accessories.