Bedpan Washer Disinfector - Energy Saver
Detergent Model With Hands Free Operation
Operation, Maintenance and Installation Manual
Issue 21
Page 12
14 September 2017
Sequence of Operation
1.
Providing machine is installed into position with power and water connected push power on button.
2.
When the unit is turned on via the display panel the
display shows fill
indicating steam generator and
cold water tanks are filling to the high water level.
At this stage the unit will not commence a cycle until Step 5.
3.
Once the steam tank water level probes sense the tank is full it will start heating.
4.
The steam tank is heated to temperature 90°C - 92°C. The machine is now ready to commence a
cycle.
The display shows rdy
(ready)
.
5.
The operator breaks the infra-red beam, which opens the door.
The display shows open.
Note: Whenever the door is opened the elements are in the off mode.
