10
11
EN
IMPORTANT: Please read the instruction manual carefully prior to installation and
keep it for future reference.
1. This product should be installed by a registered electrician in accordance with
local standards and electrical regulations.
2. Ensure the mains supply is cut off before installation.
3. Check the unit label for correct supply voltage and frequency.
NOTE
1. The diffuser must not be covered.
2. The rating label must not be removed from the lamp.
DESCRIPTION
The fitting is equipped with LED module. Complete with driver.
TECHNICAL SPECIFICATIONS
Luminaire
Art.no:
99 751 01
Wattage:
12W LED
Lumen:
990lm
Dims ØxH:
260x89 mm
Mounting:
Surface or recessed mounting on wall or in ceiling.
Note:
The terminal block is located under the diffuser.
Connect the luminaire to the mains.
Connection:
To terminal block 2x2.5 mm²
Protection Class:
IP54
Sensor
Type of Sensor
5.8GHz HF Sensor
Detection Angle:
180° wall, 360° ceiling
Reach:
8 m wall, 6 m ceiling
Time Setting:
5 sec. - 10 min.
Light Control:
2-50Lux adjustable, disabled
Summary of Contents for Neso LED
Page 2: ...2 EN FI SE sida 3 6 sivu 7 10 page 11 14 Inneh ll Sis lt Contents...
Page 15: ...15...
Page 18: ......
