34
INSTALLATION IN A SLIDING SASH WINDOW
1. Cut the foam seal (adhesive type) to the proper
length and attach it to the window frame.
Fig
.
14.
2. Attach the window slider kit to the window stool.
Adjust the length of the window slider kit accord-
ing to the width of window, short the adjustable
window kit if the width of window is less than 27
inches. Open the window sash and place the win-
dow slider kit on the window stool. Fig
.
15.
3. Cut the foam seal (adhesive type) to the proper
length and attach it on the top of the window. Fig
.
16.
4. Close the sliding sash securely against the
window.
5. Cut the foam seal to an appropriate length and
seal the open gap between the top window sash
and outer window sash. Fig
.
17.
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Foam seal
26.5"- 48"
Foam seal A
(adhesive type)
Summary of Contents for MPN1-09CRN1-QB6G1
Page 39: ......
