BC/AF-JZ/JA-121211
INstRuctION MANuAL
Malmbergs Elektriska AB, PO Box 144, sE-692 23 kumla, sWEDEN
Phone: +46 (0)19 58 77 00 Fax: +46 (0)19 57 11 77 [email protected] www.malmbergs.com
EN
Lyra LED Lamp Post
99 740 54-55
Read these instructions before starting the installation and hand it over to the user when
finished.
WARNING
1. This LED luminaire should be serial connected from + to – and be connected to a LED driver for constant
current 350mA or 700mA. Warning! If the luminaire is not connected correctly, it might get damaged.
2. Observe prescribed distances while assembly.
3. Please acknowledge that light from LED is very bright, please do not look directly into the LED light.
4. Please connect the LED luminaires to the driver before connecting the driver to the mains, otherwise the
LED can be destroyed.
INstALLAtION
•
the luminaire should be installed by a qualified electrician and according to existing regulations.
•
the luminaire must not be modified.
•
Make sure that the voltage is disconnected before installation and maintenance.
•
Position the driver in a well ventilated space. use a stranded conductor, 0.5-1.5 mm², when connecting the
luminaires. see the driver for maximum cable and maximum number of luminaires per circuit.
•
Never switch power on/off on the secondary side, as this could damage the diode.
Art.no
Name
99 740 54
Lyra I
99 740 55
Lyra II
Blue
Brown
