7
PROGRAM SETTING
1. In clock display mode, press and hold
to enter PROGRAM setting mode. Pointing arrow
flashes.
2. Press
or
to move the pointing arrow to desired ON time, each section represents 30
minutes.
3. Press
to confirm. The sections shaded black shows when the timer is ON. Unshaded sections
show when the timer is OFF.
4. Press and hold
or
, to select multiple sections in sequence simultaneously.
5. Press
to confirm.
6. To deselect activated section, press and hold
to enter PROGRAM setting mode. Pointing
arrow flashes.
7. Press
or
to move the pointing arrow to the section. Press
to deselect.
8. Without pressing any buttons for 10 seconds, the timer will save the setting program and the
LCD display will return to clock display mode.
9. Press R to reset the timer. Clock display.
Notes:
•
Press R to reset the timer. LCD display shows 0:00 AUTO, all programs and clock settings are
reset all over again.
•
In clock display mode, press
to select mode:
- Auto: timer turns on/off the appliance according to the preset program
- ON: timer always on
- OFF: timer always off
CONNECTION
1. Preset your desired ON/OFF programs on the timer as mentioned above.
2. Switch off your electrical appliance.
3. Connect your appliance’s to the timer’s socket, then connect the timer to the AC socket to get
power.
4. Switch on your appliance.
5. Appliance will then be turned ON/OFF according to your program setting.
CAUTION
•
Battery will be fully charged after connecting to the main power for 4 hours.
•
Risk of electric shock:
- Keep away from children
- Unplug timer before cleaning and program setting
- Fully insert plug
- Do not use in wet locations, the timer is for indoor use only
•
Risk of fire:
- Do not use to control appliances that contain heating elements (cooking appliances,
heaters, irons, etc.)
- Appliances connected to the timer MUST NOT exceed the specified voltage, frequency and
max. load.
