Malmbergs 99 190 29, Instruction Manual

Page: 32 / 40

32
For HVAC control (See Fig. 7)
Rubber gasket
Fig. 7
Fig. 8
Monual
Switch Supply
Voltoge
Heater
Contactor
Motion detector
Fon
M
A1
A2
N
N
N1
L
L
L1
D1 D2
Bottom cover
Fig. 9-C
Fig. 9-B Fig. 10
Installation procedure
This outdoor motion detector can be installed on wall directly & recess corner with mounting bracket
or on the ceiling directly or on the European standard junction box.
Wall mount and ceiling mount
1. When installing, the junction box of detector can be stuck on the bottom cover by inserting
the hook into the slot, so that you don’t need to hold the product on hand, to make installa-
tion conveniently (See Fig. 9-A & Fig. 9-B & Fig. 9-C)
2. Please strip off 6-8 mm of cables sheathing by tool before installation.
3. Feed the electric cables through rubber gasket (see Fig. 8) and refer to illustration of Fig. 5 -
Fig. 7 for correct wiring, then fit the bottom cover on the wall or ceiling firmly by two screws
(See Fig. 10).
Fig. 9-A
Hook
Slot
6-8 mm