TIME PROGRAMMER 1339612
WEEK’S, DOUBLE CHANNEL
INSTRUCTION MANUAL
Malmbergs Elektriska AB, PO Box 144, SE-692 23 Kumla, SWEDEN
Phone: +46 (0)19 58 77 00 Fax: +46 19 57 11 77 [email protected] www.malmbergs.com
DESCRIPTION
MAIN MENU
STORAGE MODE
DATE SETTING
1339612 series programmers have a default setting, the so called storage mode in order to protect the battery during storage.
In case of battery backup operation the storage mode is switched off during the first use of the programmer. It is done by means of a short pressing of the push-
button and subsequent date and time adjustment.
In case of a nominal power supply the storage mode is switched off during the first use of the programmer by means of date and time adjustment.
Adjusting the programmer into the storage mode is realised by means of a reset - in order to carry it out press at the same time the and push-buttons in the main
window.
APPEARANCE*
FEATURES
TECHNICAL DATA
DESCRIPTION
1339612
Power supply terminals: A1, A2
Input rated voltage: 24 ÷ 250 V AC, 30 ÷ 300 V DC
Nominal frequency: 50 / 60 Hz
Rated power consumption: 2,1 W / 4 VA
Number of channels: 2
Program quantity: 400 (100 par On/Off na kanał)
Program: daily, week’s
Operating modes: manual, automatic, random, impulse
Change of season summer/ winter: automatic, manual
Colour of LCD panel lighting: amber
Input: 2
Accuracy of time measurement: max ±1 s / 24 h at temp. 25 °C
Time of clock maintenance: 3 years
Time of programme maintenance: 10 years
Clamps of release system: IN1, IN1, IN2, IN2
Relay output terminals: 11, 12, 14, 21, 22, 24
Output relay parameters: 2 NO/NC-16 A/250 V AC1 4000 VA
Number of terminal clamps: 12
Section of connecting cables: 0,2 ÷ 2,50 mm
2
Ambient temperature range: -20 ÷ +60
o
C
Operating position: freely
Mounting: rail TH 35 (EN 60715)
Protection degree: IP20 (EN 60529)
Protection level: II
Overvoltage category: II
Pollution degree: 2
Dimensions: double-modular (35 mm) 90 x 35 x 66 mm
Weight: 0,14 kg
Reference standards: EN 60730-1; EN 60730-2-7
EN 61000-4-2,3,4,5,6,11
• Week’s cycle control in dependence of the
current hour,
• double-module casing with a protection flap,
• random op mode, additional IN control
inputs,
• double-channel version,
• many programs,
• LCD display illumination,
• mounted on TH 35 rail,
• a possibility to copy and read programs from
the external memory.
Digital control time switches 1339612 are used
to realise the time functions in automation and
control systems. Weekly programmers realise
output relay control operations according to pro-
gram adjustments (day, time). All systems have
some additional features, e.g., a random func-
tion, which can be used to simulate presence, a
control input function, which is used to change
the operating mode of a system by means of an
external push-button. An additional advantage of
the 1339612 programmer is the ability to copy
the programs adjusted in the time switch into
an external memory stick, so they can be easily
copied to other programmers. The design of the
casing allows the system to be mounted on a TH-
-35rail and eventually to seal device. The design
of the system provides battery back-up system for
all adjustments in the case of no voltage supply.
In order to protect the battery during storage,
the 1339612 series programmers have a default
setting, the so-called storage mode in which the
battery power consumption is limited to a mini-
mum.
The device is designed for single-
-phase installation and must be
installed in accordance with stan-
dards valid in a particular country.
The device should be connected
according to the details included
in this operating manual. Installation, connec-
tion and control should be carried out by a qu-
alified electrician staff, who act in accordance
with the service manual and the device func-
tions. Disassembling of the device is equal with
a loss of guarantee and can cause electric shock.
Before installation make sure the connection ca-
bles are not under voltage. The cruciform head
screwdriver 3,5 mm should be used to instal the
device. Improper transport, storage, and use of
the device influence its wrong functioning. It
is not advisable to instal the device in the fol-
lowing cases: if any device part is missing or
the device is damaged or deformed. In case of
improper functioning of the device contact the
producer.
Relay output terminals
(12, 11, 14, 24, 21, 22)
Display
Power terminals
(A1, A2)
- Current date setting; entry after pressing OK;
YEAR - choose adequate year with cursors
confirm with OK, range of years: 2000÷2099;
MONTH - choose month with cursors
confirm with OK;
DAY - choose day with cursors
confirm with OK; the system has a protection against introducing incorrect parameter of a day for a given month (it takes into
account leap years and it automatically calculates the day of the week on the basis of an arranged date);
Confirmation causes movement to a date setting window and set-up of current summer/ winter time - if the option
is arranged.
It is possible to exit every submenu window in any moment without saving settings by pressing the button or .
Menu enter by pressing OK;
menu items scrolling by means of cursors
.
External memory*
Contrpl buttons
CAUTION
Trigger terminals
(IN1, IN1, IN2, IN2)
Winter/summer time
Random mode
Manual mode
Automatic mode
IN active input
Impulse mode active
Week’s day
Relay state
Info field
Current time (gg:mm:ss)
Function Description
PROGRAM SETTING
CURRENT TIME SETTING
CURRENT DATE SETTING
WINTER/SUMMER TIME SETTING
RANDOM MODE SETTING
EXTERNAL INPUT SETTING
IMPULSE MODE SETTING
EXTERNAL MEMORY ADJUSTMENT
Description of elements and messages displayed
days of week
current date setting
relay status
random mode setting
automatic mode
extenal input setting
manual mode
impulse mode setting
random mode
external memory operation
impulse mode
external memory record
external input
external memory reading
winter time
external memory busy
summer time
reading/record error
/
day / year
/
channel 1 / 2
program setting
current time setting
automatic
user’s
switched on/switched off and summer/winter time shift
Buttons descriptions
• in the main window - enter into the automatic mode or change the relay status if the time switch is in the automatic
mode,
• in the main window (3 sec.) - random mode enter / exit,
• in the random mode - manual change of an active / inactive randomness,
• in other windows - exit to the previous level without data record,
• in the main window - enter into the manual mode or change the relay status if the time switch is in the manual mode,
• in the random mode - relay status change and randomness switch off,
• in other windows - exit to the previous level without data record;
• in the main window - enter the main menu,
• in other windows - enter the sub menu or confirm the adjusted value;
• switching the windows / menu options or increasing / decreasing the adjusted value.
