Malloca WQP6-87CP, User Manual

Page: 22 / 48

38 39
Troubleshooting
Occurrence of Failure
Failure
The dishwasher
cannot start
The dishwasher
makes noise after the
dishwasher is closed
(before a new
washing program
starts).
The dishwasher
makes noise after
washing.
Possible cause
The child lock function is
activated.
The drawer
cannot be opened
(no beeping or
watersound)
Power failure in the
course of washing
With continuous
beeping, the error
code is shown on
the screen
The machine makes
intermittent beeping
Drawer-close auto lock option
Power failure in your home
or community
A failure occurs.
The dishwasher is paused.
The power supply is not
turned on
The drawer is not closed properly
The key lock or child lock
function is activated
No key is pressed
This is normal. In the drying
program, the noise will
continue from completion of
washing to end of drying.
This is normal. After washing,
the noise caused by drying
may continue till the drawer
is closed and the set time
expires.
Disable the key lock or child lock, and press
the key “ ” till no symbol is shown on the
screen,or the indicator lamp goes out.
Press the key “ ”
No need to pay attention. The noise will stop
automatically when the set time expires,
or the drawer is opened. Sometimes, the
noise may continue after the drawer is closed.
No need to pay attention. The noise will
disappear when the set time expires.
Ensure that the drawer is closed properly
Turn on the dishwasher, and press the key
“ ” to continue the dish washing.
Turn on the power supply
Refer to the section “Occurrence of Failure”.
After power restoration, continue the dish
washing from the step when the washing
program interrupts.
Press any key, and start the dishwasher
within 30s
Disable the child lock. Press the key “ ”
till no symbol is shown on the screen.
Solution
Failure
How to know the occurrence of failure?
With the auto diagnosis function, the dishwasher can warn
the user of the failure through the continuous beeping sound.
Both the washing program panel in the drawer and
the screen show the error code.
What measure shall be taken in case of failure?
Diagnose the failure in accordance with the flow chart below. Partial failures may be
eliminated (together with others); however, it is necessary to contact the after-sales
service center to arrange the repair. Please refer to the section “Troubleshooting” for
the contact information.
The motor
noise is very
loud
Possible cause
There is no water around
the motor.
Such case often happens upon initial use
of dishwasher or reuse of dishwasher that
has been out of service for a long period.
3 cups of water shall be filled into the
dishwasher before the washing program
starts.
Solution
E0 *