BEFORE LOADING & PLUGGING IN THE WINE COOLER
Important: All models without front venting (air opening) are strictly for free standing
only. (See technical chart)
Recommendations:
The location you have selected for your Wine cooler should:
- be unencumbered and well ventilated;
- be well away from any heat source and direct sunlight;
- not be too damp (laundry, pantry, bathroom etc.);
- have a flat floor;
- have a standard and reliable electricity supply (standard socket to country standards,
linked to the ground), it is NOT recommended to use a multi-socket or extension lead;
- have a surge protector fitted to the electrical outlet;
- Away from the microwave oven. Certain microwave ovens do not have wave
interference shield. When placed within 1 meter vicinity of the Wine cooler, they may
affect the operation of the Wine cooler.
Notes:
These models are Both built-in and free-standing type as per the drawings thereafter.
Wine cooler should be install at suitable ambient temperature (please refer the end of User
Manual). If the temperature is higher or lower the ambient temperature range, it will affect
temperature fluctuation and can’t reach cooling performance.
Grounding instructions:
The Wine cooler must be grounded in case of wire leakage. Grounding reduces the risk of
electrical shock. The Wine cooler is equipped with a power cord having a grounding wire
and plug. The Wine cooler plug must be plugged into a properly affixed and grounded
electrical outlet.
Note:
In locations where there is frequent lightning, it is advisable to use surge protectors.
Improper use of the grounding plug can result in the risk of electric shock. Consult a
qualified electrician or service person if the grounding instructions are not completely
understood.
If the supply cord is damaged, it must be replaced by a qualified person in order to avoid
electrical hazard.
INSTALLING YOUR WINE COOLER
Unpack and remove all of the protection and adhesive strips from the packaging around and
inside the Wine cooler.
The Wine cooler must be positioned such that the plug is accessible. Release the power cord.
Move your Wine cooler to its final location. The Wine cooler should be installed in a
suitable place where the compressor will not be subject to physical contact.
3
