2
SAFETY PRECAUTIONS
This Built-in electrical oven is manufactured for use in the preparation of
normal home meals. Please do not use for other purposes.
Installation:
This appliance must be installed by qualified personnel, according to
the manufacturer’s instructions and the relevant Safety Standards.
This appliance is heavy. Take care when moving it.
Remove all packaging, protective films and oils from the appliance
before using for the first time.
Ensure that the electrical supply complies with the type stated on the
rating plate.
Do not attempt to modify the appliance in any way.
The voltage of your oven is 2
Ϯ
0
ͲϮϰϬ
Volt – 50-60 Hz.
This appliance has been constructed and distributed in compliance
with the regulations of AS/NZS 3350-1 and AS/NZS 3350-2-6.
This appliance must be correctly installed by a suitably qualified
person in conjunction with Australian Wiring rules AS3000.
Warning: This appliance must be earthed.
Do not use a steam cleaning device with this appliance.
WARNING : ensure the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
When you have finished cooking check that all controls are in the OFF
position.
Please check your electrical installation is earthed. This appliance
must be installed by a qualified engineer.
This appliance must be fitted with a min 16 A Fuse.
Please ensure that plug of your oven is not accidentally pulled or
stretched beyond the extent of the power cord. If this appliance is
installed without proper earthing the manufacturer doe
s
not accept
any reasonability for any damage caused. Commissioning of this
appliance should only be attempted by an Authorised Service or an
expert authorised by customer relations. Connection of this
appliance must be via a cable that is 3 x 2.5 mm2
For isolation safety the length of the power cord must not exceed 2
meters.
