Malloca MH-03IR, Operating And Installation Instructions

Page: 38 / 91

38
Heat-up function
Activating the heat-up function
The heat-up function is activated by selecting the power level 9 and touching
the [+] key.
The decimal point of the display blinks for 10 seconds.
During these 10 seconds the desired power level must be selected (between 1
-
ing the heat-up function is on. If the power level is 0 or 9, the heat-up function is
cancelled.
If the heat-up function is actived, pressing the heater [+] key, the duration of
the heat-up function will be the duration for the new power level, if the new level
is 9, the heat-up function is cancelled.
Cancelling the heat-up function
The heat-up function can be cancelled either automatically, when the time ex-
pires or when the user wishes.
When the heat-up function is cancelled automatically, a beep sounds, the deci-
mal point of the display turns out and the power level of the heater remains the
selected power level.
If you press the [-] key when the heat-up function is activated, this function is
cancelled.
Use
Power level 1 2 3 4 5 6 7 8
Time (sec.) 1’12” 2’44” 4’48” 5’28” 6’30” 1’12” 2’44” 2’44”