Malloca HIH-864, User Manual

Page: 47 / 67

FUNZIONAMENTO I OPERATION GB
F:Filter reset key: Active only in filtration mode:
After 120 hours of operation of the hood,
the symbol F, alternating with the symbol C, will flash indicating the need to clean/replace the
activated carbon filters; the carbon filters can be washed in the dishwasher once, and then they
must be replaced.
In suction mode, the alarm of carbon filters is disabled.
A:Timer key:
when touching the key, the timer will be enabled, regardless of the selected suction
speed. Upon first touch, the time will be 5 minutes (shown by a flashing button on the key), the
second touch corresponds to 10 minutes (double flashing time) and the third touch to 20 minutes
(triple flashing time) The timer key will flash throughout the entire operation.
A fourth pressure of the button will disable the timer function.
E:Intensive key:
when touching the button, the motor switches directly to the first intensive
phase (5th speed, timed for approximately 8 minutes); a second pressure of the button activates
the second intensive phase (6th speed, timed for approximately 6 minutes). For the version with
4-speed (serial) motor, the button activates and deactivates the intensive speed (4th speed, timed
for approx. 8 minutes).
The timing of speed is active only in suction mode.