- -
5
- -
6
the alarm will disappear in 2 minutes.
◆
It is set to press any button for 0.3 seconds, but if the ON/OFF button
is pressed
over 0.3 seconds, and keep longer than 0.8 seconds, the hob will turn-off
automatically.
Turn-off Timer/Change Timer setting
◆
Turn-off timer by pressing the button” ”until it display“00”,
Meanwhile,
it is also available by pressing” ” buttons at the same time to set to “00”. In 10
seconds, it will automatically turn off. Moreover, it is available to turn off by
pressing the ON/OFF button .
Misoperation
◆
Press a button for a long time
◆
When any button is pressed over 10 seconds, there will show Error icon
on the LED (No error icon under child lock function)
Multiple Button Operation at the Same Time
◆
When pressing several buttons at the same time, it will not react.
But when pressing over 10 seconds, there will show error icon
Multiple Button Operation Successively
◆
When press several buttons successively, it will only trigger the
function of first button in the normal condition. And the function of
the other buttons will not be triggered. Ten seconds later, it will show Error icon.
Display of Error Code in the Heating Area
◆
There are two kinds of Error: general error and heating area error.
◆
The general error will turn off the whole control board and display
alternatively” Er” and two-bit error code.
General Fault Code
Showing
Description
Possible Reason
Shooting
Er22
Button fault
Touching controller fault
Change
touch
control board
Other
Inner
fault
of
control board
Inner fault in control board
Professional
maintenance
Operation Guide for Induction Hob
◆
Connect the appliance to the power supply. Touch the ON/OFF
button (button 1)
for about 0.8 second. The columns will show in succession from left to right.
It is advisable to input power level,otherwise the hob will turn off
Turning on the Heating Area
O
N/OFF of Heating Area
◆
Press the” ”button for about 0.3 seconds when the appliance
is turned on. The heating area is available for operation.
Turning off the Heating Area
◆
Press the ” ”button for about 0.8 seconds, the heating area will be turned off.
Residual Heat Indication:
◆
Considering the safety of the user, when the surface temperature
is higher
than 65
there will be residual heat indication.
℃,
◆
The residual heat will be displayed at the fourth LED of the
displaying area
of heating area and it will display ”H”. The left heating area is correspondent
with LED14, right heating area is correspondent with LED15.
Shutting off Automatically (At Maximum Time Limit)
◆
Each heating power level has a maximum work time limit, please refer to the power
table in the appendix (For example, the maximum work time limit for 6 power
t h
level is 90 seconds).If one power level has worked longer than the table showed maximum
time limit, the relative heating area will turn-off automatically. If regulating the power
within working maximum limit time, it will come to a new maximum working time limit. But
if the heating area had been set time with timer in advance, the heating
area will not turn-off automatically.
Child Lock Function:
Activate the child lock
◆
When the hob is standby or heating, touch the child lock button for about
two seconds, the child lock indicator will on, the controller is still in old working
state, but it will not respond to other buttons except the child lock button
itself and ON/OFF button .
◆
Turn on child lock button when the hob is working, press ON/OFF
button
of any heating area for about 0.8 seconds, the hob will turn-off automatically.
◆
The child lock function has memory. Even if it is in turn-off state,the child
lock function will still exist. When the hob is in turn-off state, touching any
button (except the ON/OFF button ) will cause bee ring from the buzzer,
and the child lock indicator will on for 1 second.
automatically.
Unlock the child lock
◆
Press the child lock button again for about 2 seconds when the hob is in
