Malloca DRIVE F-152, User Manual

Page: 9 / 19

GB INSTRUCTION ON MOUNTING AND USE
Check also the drawings on the initial pages with the alphabetical and numerical
references in the explanatory text.
Closely follow the instructions in this manual. We cannot accept liability for any
faults, detriment or fire damage to the appliance due to non-compliance with the
manual’s instructions. Installation and electrical connections must be executed by a
qualified technician. You should affix the hood to a wall of the sufficient weight-
bearing capacity, so not to one made of plasterboard. Do not install it inside a
cupboard. Attach it to the wall using the anchors provided.
Installation
The cooker hood must be placed at a minimum distance of 65 cm from the cooking
plane for electric cookers and 75 cm for gas or mixed cookers.
If the instructions for installation for gas hob specify a greater distance, this has to
be taken into account.
Do not tile, grout or silicone this appliance to the wall. Surface mounting only. Do
not fix chimney flue can be easily removed, in case maintenance is ever required.
Use
The cooker hood is provided with an upper air exit
B
for discharging fumes
externally for models including chimney flue
C
(
Suction Version A
-exhaust pipe
not supplied). If the cooking fumes and vapours cannot be externally discharged,
the cooker hood can be used in the
recirculating version F
: the installation of 1
active charcoal filter F allows the recirculation of fumes and vapours through the
upper grid
G
.
Electrical connection
Make sure that there is a power socket near the hood and that the system has a 30
mA differential. The mains voltage must be the same as that on the label inside the
hood. The hood has a 1250 mm power cable with or without plug: if it does have
plug, connect the hood to an accessible approved socket; or if it does not
(connection direct to the mains), fit an approved bipolar switch with a minimum
contact opening of no less than 3 mm (accessible). This installation and electrical
connection must be executed by a qualified technician.
Operation
F 2
1
Push
3