After binding the ID codes of all the tires, click the upper right corner
After entering the interface of Figure B, click on “Supporting Device
After entering the interface of Figure C, click on “Searching for Device”
Shortly press the button to turn on the voice receiver,
When the "MLD_R03 key in Figure D appears, click this button to bind.
When the “Binding Successful” voice is heard and the prompt box in
of the main interface to set the symbol
Binding”.
to find the voice player.
then press and hold the voice player button
on the top
of player for 5 seconds until the red and blue lights flash alternately. Then the voice broadcaster enters the
Figure E appears, the voice
broadcaster is bound, and finally click “I Know” to exit the prompt box.
Binding of Voice
Broadcaster
语音播报器绑定
1、绑定好所有轮胎的ID码后，点击这界面右上角设置符号进入图A界面;
2、进入图B界面后，点击“配套设备绑定”;
3、进入图C界面后，点击“搜索设备”以查找语音接收器;
4、短按按钮以启动语音接收器,然后长按语音接收器按钮5秒，直到按钮上端红蓝灯交替闪烁，此时多功能胎压
语音接收器进入配对模式;
5、当出现图D中的“MLD_R03”按键时,点击此按键进行绑定;
6、当听到“绑定成功”语音且出现图E中的提示框时,语音播放器绑定成功,最后点击"我知道了"退出提示框;
A
B
C
D
E
系统设置
语音提醒
语言
简体中文
车辆设定
系统参数设定
绑定新设备
调胎设定
配套设备绑定
日志报告
帮助
配套设备绑定
?
搜索设备
?
搜索中...
MLD_R03
配套设备绑定
配套设备绑定
?
搜索设备
完成
资料发送成功
我知道了
to enter the interface A.
matching mode.
