Malibu Boats Wakesetter 20VTX 2019, Owner'S Manual

Page: 85 / 238

Touch SERVICE to
view maintenance
schedules recom-
mended by the
engine manufactur-
er. Service notices
will appear at each
key cycle when
the service hour interval has been reached. These notices must the
cleared by the user.
Touch STEREO
SXM RESET to re-
store stereo factory
default settings. Set
the mode to SXM
before proceeding.
Touch WEDGE
SURF GATES, then
WEDGE to view
POWER WEDGE
position and sensor
voltage. Wedge
position is adjustable
with the +/- buttons.
Touch WEDGE
SURF GATES, then
SURF GATES to
service and view
current status.
Press the SER-
VICE button, then
follow the on-screen
instructions to service the SURF GATES.
Touch WEDGE
SURF GATES,
then TANK LEVEL
to view current
BALLAST TANK and
FUEL levels.
Maps Screen
The Navionics Navigation System uses GPS (Global Positioning
System) satellites, and a map database to calculate and display route
directions. SD Card with Map Data is required.
When a Navionics SD card is loaded into the Viper II SD
Slot, map data for
the region will ap-
pear as a bunch of
purple boxes on the
map. If the purple
squares do not
appear on the map,
the card is missing,
not installed
correctly, or possibly defective.
Touch ANYWHERE
ON THE MAP to
activate the pop-up
controls. Touch the
SIX DIRECTIONAL
ARROW buttons
along the perimeter
of the map window
to position the
cursor. Touch the RETURN button to return the cursor
to the CURRENT LOCATION and the+/- buttons to ZOOM IN/OUT.
2019 Malibu Boats, LLC Owner’s Manual • Page 72
https://www.boat-manuals.com/