Malibu Boats M235 2018, Owner'S Manual

Page: 104 / 200

Malibu Owners Manual • 2018 • Dashes and Video Screens • Page 3-35
PULL TYPE
Touch the Pull Type Off (which means it is currently not operating) to
turn this feature on, and the following screen will appear:
No two skiers are alike. Therefore the pull types exist to customize the
ride to the skier.
Keep in mind the concepts of Pull and Release. As you begin your pull,
the boat speed begins to drop below the set/target speed. As you let up on
your pull, the boat speed begins to rise higher than the set/target speed. The
letter tells the engine how quickly to begin the apply or reduce power to
get back to the set speed. The lower the letter (A being the lowest) the longer it will take for the engine to respond to the speed drop.
The higher the letter (C being the highest) the faster the engine will respond to the speed drop.
Choose the appropriate type based on the following criteria:
Category A—This provides a slower engine response out of the buoy, but the boat will tend to move ahead as the skier approaches
the buoy.
Category B—This provides a moderate engine response compared to A and C.
Category C—This provides a fastr engine response out of the buoy, but the boat will tend to hold back as the skier approaches the
buoy.
The numbers decide how strong the pull of the boat will be felt by the skier.
Setting 1—This requires the lowest amount of load before the system initiates an RPM spread, and provides for a softer pull behind the boat.
Setting 2—This provides for a moderate pull behind the boat as compared to 1 and 3.
Setting 3—this requires the highest amount of load before the system initiates an RPM spread.
PLUS (+) FACTOR
For each letter setting, the + provides faster engine response. This will benefit skiers looking for immediate react from the
engine/throttle.
NOTE: The engine will respond quicker on A+ than on C.
Touch the + Factor to turn On and Off.
TROUBLESHOOTING GUIDE
Display appears not to work or doesn’t come on.
1. Display could be in SLEEP mode. Touch a key on the keypad to activate the display.
2. Check for loose connections at the battery and display unit.
3. Check for reversed polarity on the power connections.
4. Verify the battery has a minimum voltage of six (6) volts.
Display resets or goes OFF when starting the engine.
1. Check that the display supply wires are connected properly to the battery.
2. Verify that the battery is charged properly.
3. Check the battery for efficient starter current.
Display has no backlight.
1. Contact your authorized Malibu dealer for assistance.