Malaguti F10 2008, Workshop Manual

Page: 17 / 40

1
NO
OK
NO
OK
OK
Tester (K Ω )
1
F. 8
OK NO
I G N I T I O N S Y S T E M
. Control unit power supply
Detach connector of flywheel.
Connect Tester (K Ω).
Terminal (+) of Tester Red/black cable (1) .
Terminal (-) of Tester Engine grounding () .
Resistance: 790 ÷ 850 Ω at 20° C .
•
•
•
•
•
Replace stator.
6. Key switch •
Turn key “ OFF ” and then “ ON ”.
Check continuity of key switch. Tester (Ω) .
See “Checking switches” (P. 12).
•
•
•
Replace key switch.
. Connections of ignition system
Check connections of ignition system.
See “Wiring Diagram” (P.8).
•
•
Resume connections of ignition system.
Replace “CDI” control unit ( code n°: 02415700 ).