makute DH35, Manual

Page: 4 / 8

www. makute .com
-3- -4-
changing accessories.
27.Keep handles dry, clean and free from
oil and grease.
HAMMER SAFETY
WARNINGS
1. Wear ear protectors. Exposure to
noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied
with the tool. Loss of control can
cause personal injury.
3. Hold power tool by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord. Cutting accessory contacting a
“live” wire may make exposed metal
parts of the power tool “live” and
could give the operator an electric
shock.
4. Wear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary
eye or sun glasses are NOT safety
glasses. It is also highly recommended
that you wear a dust mask and thickly
padded gloves.
5. Be sure the bit is secured in place
before operation.
6. Under normal operation, the tool is
designed to produce vibration. The
screws can come loose easily, causing
a breakdown or accident. Check
tightness of screws carefully before
operation.
7. In cold weather or when the tool has
not been used for a long time, let the
tool warm up for a while by operating
it under no load. This will loosen
up the lubrication. Without proper
warm-up, hammering operation is
difficult.
8. Always be sure you have a firm
footing. Be sure no one is below when
using the tool in high locations.
9. Hold the tool firmly with both hands.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate
the tool only when hand-held.
12. Do not use the tool to point at any
one in the area when operating. The
bit could fly out and injure someone
seriously.
13. Do not touch the bit or parts close to
the bit immediately after operation;
they may be extremely hot and could
burn your skin.
14. Do not operate the tool at no-load
unnecessarily.
15. Some material contains chemicals
which may be toxic. Take caution
to prevent dust inhalation and skin
contact. Follow material supplier
safety data.
SAVE THESE INSTRUCTIONS
WARNING:
DO NOT let comfort or familiarity with
product (gained form repeated use) replace
strict adherence to safety rules for the
subject product.
MISUSE or failure to follow the safety
rules stated in this instruction manual may
cause serious personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is
switched off and unplugged before
adjusting or checking function on the
tool.