Mäktig 710135 Owner'S Manual Download Page 4

4

 

 

STAGE 3 – Float Charge -- Voltage is automatically maintained and 
reduced to a predetermined level while current is adjusted for a safe, 
effective battery charge.  

The Automatic Float Charge feature is ideal for maintaining a battery. It 
automatically tops off battery as needed, to keep battery fully charged. 

 

2.  IMPORTANT SAFETY INSTRUCTIONS  

 

 

WARNING – RISK OF EXPLOSIVE GASES 

WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS 
DANGEROUS.  BATTERIES GENERATE EXPLOSIVE GASES DURING 
NORMAL BATTERY OPERATION.  FOR THIS REASON IT IS OF THE 
UTMOST IMPORTANCE THAT EACH TIME BEFORE USING YOUR 
CHARGER, YOU READ AND FOLLOW THE INSTRUCTIONS 
PROVIDED EXACTLY.  
 
TO REDUCE RISK OF BATTERY EXPLOSION, FOLLOW THESE 
INSTRUCTIONS AND THOSE PUBLISHED BY THE BATTERY 
MANUFACTURER. 

 

 

WARNING:

 Handling the cord on this product or objects associated 

with the use of this product may expose you to lead.  

Wash hands after 

handling.

 

  Read all instructions and cautions printed on the battery charger, 

battery and vehicle or equipment using battery. 

  Use the charger for charging lead-acid batteries only such as those 

used in cars, trucks, motorcycles, boats, etc.  It is not intended to 
supply power to a low-voltage electrical system or to charge dry-
cell batteries commonly used in household appliances such as 
radios, toys, camera, etc.  Charging dry-cell batteries may cause 
them to burst and cause injury to persons and damage to property. 

  Use of an attachment not recommended by the battery charger 

manufacturer may result in the risk of fire or electrical shock. 

  Do not disassemble charger.  Take it to a qualified service 

professional if service or repair is required.  Incorrect assembly 
may result in fire or electrical shock. 

  To reduce risk of electrical shock, unplug the charger from the 

outlet before attempting any maintenance or cleaning. 

Summary of Contents for 710135



















Reviews: