4
GEB015-3
BELT SANDER SAFETY
WARNINGS
1.
Hold power tool by insulated gripping
surfaces, because the belt may contact its own
cord.
Cutting a "live" wire may make exposed
metal parts of the power tool "live" and could give
the operator an electric shock.
2.
Ventilate your work area adequately when you
perform sanding operations.
3.
Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
4.
Always use the correct dust mask/respirator
for the material and application you are
working with.
5.
Always use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
6.
Hold the tool firmly with both hands.
7.
Make sure the belt is not contacting the
workpiece before the switch is turned on.
8.
Keep hands away from rotating parts.
9.
Do not leave the tool running. Operate the tool
only when hand-held.
10.
This tool has not been waterproofed, so do not
use water on the workpiece surface.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Switch action
1
2
007741
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns
to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, and then release it.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing abrasive belt
1
007742
Pull the lever all the way out and install the belt over the
rollers, and then return the lever to the original position.
CAUTION:
•
When installing the belt, make sure that the
direction of the arrow on the back of the belt
corresponds to the one on the tool itself.
1. Lever
1. Lock button
2. Switch trigger