P
7
/
9
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-4. Shaft lock
DISASSEMBLYING
Fig. 8
Fig. 9
Setting 1R268 to Shoulder pin 5 through the small hole on Pin
cap, and tap 1R268 with Plastic hammer.
Shoulder pin 5 comes out from Gear housing complete.
Release 1R268 from Pin cap carefully
so that
Pin cap does not be slung by
Compression spring 12
.
Note:
Do not reuse Pin cap, removal of
Shoulder pin 5 damages the inside
surface of Pin cap, producing plastic
dust.
Shoulder pin 5
(1) Remove Bearing box section from Gear housing complete. (
Fig. 1
)
(2) Shaft lock mechanism can be disassembled. (
Figs. 8
,
9
)
1R268
Pin cap
Pin cap
Compression
spring 12
Fig. 10
Fig. 11
Pin cap
Compression spring 12
(1) Be sure to use a new Pin cap for replacement and to remove all the plastic dust on Shoulder pin 5. (
Fig. 10
)
(2) Assemble the Parts for Shaft lock mechanism. (
Fig. 11
)
Plastic dust
Shoulder pin 5
Remove Plastic dust from
the constricted part of
Shoulder pin 5.
Assemble Compression spring 12 and Pin
cap by pressing them to Shoulder pin 5.
Insert Shoulder pin 5 through the hole
of Gear housing complete.
ASSEMBLING
Shoulder
pin 5
Shoulder
pin 5
