14
5 Operation
5 Operation
IMPORTANT: All maintenance or cleaning on the machine must be made with the machine OFF and unplugged
from the outlet to prevent accidental shock.
• Periodic maintenance on your RBB 4G Edge Trimmer will ensure optimum performance. Make it a habit
to inspect your machine every time you use it. This section covers the service adjustments or common
procedures that may need to be made during the life of your machine.
• Verify if the following conditions for repair or replacement are needed:
• Loosen screws.
• Switches or buttons damaged.
• Cables, plugs or sockets worn or damaged.
• Any other condition that could adversely affect the safe
• Operation of the equipment
• The machine must be operated with all protections and security systems. always keep the operator’s
physical integrity as a priority.
Once assembled, your equipment will be ready for use, as it will be delivered pre-adjusted. For correct usage,
follow the steps shown below.
The operations carried out by the RBB.4G Trimmer, as with any other machine, may pose risks to the operator if
the safety and adjustment instructions are not respected. These instructions are written with the understanding
that the operator has the necessary knowledge and skills to operate this equipment.
If at any time you experience diffi culties in carrying out any operation, stop using the machine. If you are an
inexperienced operator, we recommend that you read the manual and operating instructions carefully or seek
the instruction of an experienced operator.
5.1 Setup and control
1. Familiarize yourself with the control panel. In it you will fi nd 3 buttons, marked on the panel itself. Pay
attention to the fact that, if the emergency button is pressed, the machine does not start. This button must
be twisted on for the equipment to work. (Connect the socket previously installed to the 110V single-phase
outlet, In the control panel you will fi nd different commands.)
